Lexmark C54x Administrator's Manual page 69

Appendix
Function access control
FTP Function
Held Jobs Access
PictBridge Printing
Release Held Faxes
Use Profiles
Function access control
New Solutions
Solution 1–10
Note: Depending on the solutions you have installed, additional solution‑specific access controls may be listed below
solutions 1–10. Use these additional access controls if they are available for your installed solutions. If no additional
solution‑specific access controls are available, then assign one of the ten numbered access controls to each solution
you want to protect.
Understanding the home screen
The screen located on the front of the printer is touch‑sensitive and can be used to access device functions and navigate
settings and configuration menus. The home screen looks similar to this (yours may contain additional icons):
Release Held
Copy
FTP
Held Jobs
Ready.
Status/
Supplies
Touch on the lower right to access settings and configuration menus for the device.
Note: Access to device menus may be restricted to administrators only.
What it does
This controls access to the Scan to FTP function.
This protects access to the Held Jobs function.
This controls the ability to print from an attached PictBridge‑enabled digital camera.
Note: Selected devices only.
This controls the ability to release (print) held faxes.
This controls access to profiles, such as scanning shortcuts, workflows, and eSF
applications.
What it does
This controls the initial security profile of each solution‑specific access control
installed on the printer.
The Solution 1 through Solution 10 access controls can be assigned to installed eSF
applications and profiles created by LDSS. The access control for each solution is
assigned in the creation or configuration of the application or profile.
E-mail
Faxes
@
Search
Held jobs
69