Setting Certificate Defaults - Lexmark C54x Administrator's Manual

Managing certificates and other settings
3
Click any of the following:
•
Delete—Remove a previously stored certificate.
•
Download To File—Download or save the certificate as a .pem file.
• Download Signing Request—Download or save the signing request as a .csr file.
•
Install Signed Certificate—Upload a previously signed certificate.

Setting certificate defaults

Administrators can set default values for certificates generated for a supported device. The values entered here will
be present in all new certificates generated in the Certificate Management task, even though those fields will remain
blank on the screen.
1
From the Embedded Web Server, click Settings > Security > Certificate Management > Set Certificate Defaults.
2
Enter values in the appropriate fields:
•
Common Name—Type a name for the device (128‑character maximum).
Note: Leave this field blank to use the domain name for the device.
• Organization Name—Type the name of the company or organization issuing the certificate.
•
Unit Name—Type the name of the unit within the company or organization issuing the certificate.
•
Country/Region—Type the country or region where the company or organization issuing the certificate is
located (2‑character maximum).
•
Province Name—Type the name of the province or state where the company or organization issuing the
certificate is located.
•
City Name—Type the name of the city where the company or organization issuing the certificate is located.
•
Subject Alternate Name—Type the alternate name and prefix that conforms to RFC 2459. For example, type
an IP address using the format IP:1.2.3.4, or a DNS address using the format
DNS:ldap.company.com. Leave this field blank to use the IPv4 address.
Note: All fields accept a maximum of 128 characters, except where noted.
3
Click Submit.
27