Safety Precautions - Emotiva RSP-1 User Manual

Safety Precautions

Read this User's Guide thoroughly before attempting to install and configure the Emotiva RSP-1 Preamplifier.
All the safety and operation instructions should be read before any operation of the component(s) begin.
After successful installation and configuration of the Emotiva RSP-1 Preamplifier, be sure to retain this
manual in a safe place for any future reference needs.
All warnings on the Emotiva RSP-1 Preamplifier and in these operating instructions should be followed.
Safety is a key component to a long lasting and trouble free installation. The vast majority of the subsequent
safety precautions involve simple common sense. If you are not comfortable with the installation of audio/
video entertainment equipment, it will be to your benefit to seek the services of a qualified installation
professional.
• The Emotiva RSP-1 Preamplifier should NEVER be used near water such as a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, etc.
• The Emotiva RSP-1 Preamplifier should be situated so that its location or installation position does not interfere
with proper ventilation.
• The Emotiva RSP-1 Preamplifier should not be situated on a bed, sofa, rug, or similar surface that may block any
ventilation openings; or placed in a built-in installation such as a bookcase, cabinet, or closed equipment rack
that may impede the flow of air through ventilation openings. If installed in a closed equipment rack for custom
installations, be sure to add forced air ventilation so that it has adequate air circulation.
• The Emotiva RSP-1 Preamplifier should be situated away from heat sources such as radiators, or any other
devices which produce heat.
• The Emotiva RSP-1 Preamplifier should be connected to a power supply only of the type described in this User's
Guide and what is labeled on the RSP-1 component. Power supply cords should be routed so that they are not
in high foot traffic areas or pinched by items placed upon or against them, paying particular attention to cords
at the wall plugs, convenience receptacles, and the point where they connect into the RSP-1 Preamplifier. The
power cord of the RSP-1 Preamplifier should be unplugged from the outlet when unused for a long period of
time.
When it's time for cleaning the Emotiva RSP-1 Preamplifier, it should be cleaned only as recommended in
this User's Guide. Never spray liquids directly into the component's vent openings. Care should be taken so
that small objects do not fall into the inside of the RSP-1 Preamplifier.
The following situations require your Emotiva RSP-1 Amplifier is serviced only by qualified service personnel:
1. The power-supply cord or the plug has been damaged; or
2. Objects have fallen, or liquid has spilled into the component; or
3. The RSP-1 has been exposed to rain; or
4. The RSP-1 does not appear to operate normally or exhibits a marked change in performance; or
5. The RSP-1 has been dropped, or its enclosure or chassis is damaged.
The user should not attempt to service the RSP-1 Preamplifier beyond the means described in this User's
Guide. All other servicing should be referred to qualified service personnel.
Page 4