Important Safety Precautions And Explanation Of Symbols - Emotiva XPA-100 User Manual

Important Safety Precautions and Explanation of Symbols

The exclamation point within an equilateral triangle is intended to alert the user to the presence of
!
important installation, operation, and service instructions in this manual.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltages within the enclosure that may be of sufficient
magnitude to constitute a risk of electrical shock to the user.
Please read this Manual thoroughly before attempting to install, configure, or operate the XPA-100
power amplifier. After successful installation and configuration of the XPA-100, be sure to retain this
manual in a safe place for future reference.
Safety is a key component to a long lasting and trouble free installation. Please read and follow
all instructions and heed all warnings on the XPA-100 and in this manual. The vast majority of the
subsequent safety precautions are common sense. If you are not comfortable with the installation
of audio/video entertainment equipment, you should seek the services of a qualified installation
professional or call us for help.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THE
!
XPA-100 NEAR WATER OR IN WET LOCATIONS, DO NOT EXPOSE IT TO RAIN OR MOISTURE,
DO NOT EXPOSE IT TO DRIPPING OR SPLASHING FROM OTHER SOURCES, AND ENSURE
THAT NO OBJECTS FILLED WITH LIQUIDS (SUCH AS VASES) ARE PLACED ON IT. DOING SO
MAY RESULT IN DAMAGE TO THE UNIT AND THE RISK OF ELECTRIC SHOCK, WHICH MAY
RESULT IN BODILY INJURY OR DEATH.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER
FROM THE XPA-100. THERE ARE NO USER-SERVICEABLE PARTS INSIDE THE UNIT. REFER
ALL SERVICE TO QUALIFIED SERVICE PERSONNEL.
Do not install the XPA-100 near or above any heat sources such as radiators, heating vents, or other
apparatus that produces heat. Do not block any ventilation openings or heat sinks. Avoid installing
the unit directly above other heat-producing equipment unless sufficient ventilation or forced-air
cooling is provided.
Do not install the XPA-100 in locations without proper ventilation. The XPA-100 should not be
operated on a bed, sofa, rug, or similar surface that may block vents. The unit should not be installed
in an enclosed location such as a bookcase, cabinet, or closed equipment rack unless sufficient
forced-air ventilation is provided.
Always install your XPA-100 according to the manufacturer's instructions and only use attachments
or accessories specified by the manufacturer.
Do not install the XPA-100 on any stand, shelf, or other piece of furniture that is unable to support its
weight. If a cart is used to move the unit, use caution to avoid injury from tip-over.
Connect the XPA-100 only to power sources of the correct voltage (as shown in this manual and on
the XPA-100 unit).
Protect power supply cables from being pinched, walked on, or otherwise damaged. Be especially
careful where the power cable enters the power outlet and the unit.
Only connect the XPA-100 to an electrical outlet or extension cord of appropriate type and rating.
DO NOT defeat the safety purpose of a grounding or polarized plug by removing ground pins or
using unsafe adapters. A polarized plug has two blades - one wider than the other. A grounding plug
has a third ground prong in addition to the two main conductors. The wide blade or third groundling
prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician to
replace your obsolete outlet. If you replace the power cord, only use one of similar type and equal or
greater current rating.