Rsp-1 Front Panel Layout - Emotiva RSP-1 User Manual

RSP-1 Front Panel Layout

8
11
9
12
10 13
15
1
Soft Touch Power Switch
This switch provides the ON/OFF
control of the RSP-1 from the
front panel. When the unit is off
and in standby mode, the switch
illuminates yellow. Once the unit is
turned on, the switch illuminates
blue. The unit can also be turned
ON and OFF with the supplied
remote control.
2
I/R Receiver Window
Point the remote at this window
for operation of the RSP-1 by
remote.
3
Source Selection Buttons
These buttons provide selection
capability of each source input on
the RSP-1.
4
Vacuum Fluorescent Display
The cool blue VFD display shows
the source input as well as other
information.
5
Main Volume Knob
This knob provides the main
volume for the system. It is a
motorized potentiometer that also
moves when volume is adjusted
via remote.
Page 10
4
3
2
14
1
6
Bass and Treble Adjustments
Push in to release these
adjustment controls for either
Bass or Treble. Once adjusted,
push in again to sit flush with the
aluminum faceplate.
7
Balance Adjustment
Push in to release this adjustment
controls for Balance. Once
adjusted, push in again to sit flush
with the aluminum faceplate.
8
Mute Button
Push to mute the RSP-1. The MUTE
LED will illuminate when this
feature is engaged. This feature is
also available via remote.
9
Direct Button
Push to bypass all of the preamp
functions of the RSP-1 including
the external processor loop and
bass/treble controls. The DIRECT
LED will illuminate when this
feature is engaged. This feature is
also available via remote.
10
Tape Monitor Button
Push to switch to the TAPE input/
output. When connected to the
TAPE inputs and outputs, this will
enable recording from the current
input selected on RSP-1. The TAPE
LED will illuminate when this
feature is engaged. You can also
listen to what will be recorded.
7
6
14
11
Mono Button
Push to combine left and right
(L+R) channels of the RSP-1 . The
MONO LED will illuminate when
this feature is engaged. This feature
is also available via remote.
12
Panel Dim
Push to dim the panel illumination.
There are 3 levels of panel dimming
available: Bright, Medium, Dim.
Pressing the PANEL DIM button
scrolls through these settings.
13
External Processor Button
Push to switch to the External
Processor input/output. When
connected to the EXT PROC inputs
and outputs, this will enable signal
processing of the current input
selection to pass through the
processor loop. The EXT PROC LED
will illuminate when this feature
is engaged. This feature is also
available via remote.
14
Activity LEDs
These LEDs illuminate when the
labeled function in engaged. All of
the labeled indicators are available
as remote commands. When
receiving remote commands, the
COM/RECV LED illuminates as well.
15
Headphone Jack
A standard 1/4" Headphone jack is
provided on the front panel.
5