Emotiva RSP-1 User Manual page 28

Step 10 - With the basic input devices verified, you can now adjust any level control on your amplifier(s)
and/or powered subwoofer. If you are using a powered subwoofer, now would also be the time to
set any low pass filter and phase controls.
If you have gotten to this point and you are able to hear sound in all speakers, you have most of the work
done. If for some reason all speakers are not playing or there is some other problem, please check the
troubleshooting section of the manual to narrow down your problems before moving along.
All that's really needed from here is tweaking your speaker positions and the relative levels of each channel
if adjustable at the amplifier. Don't forget to position your chair with enough room for a cold beverage and
your favorite collection of music.
Page 28