ORDER OF OPERATION
1. SELECT SPEED-Turn Control Dial to the desired speed.
2. PULSE OR ON -Press either "PULSE" or "ON" buttons to begin processing. This
will cause the unit's motor to run. The speed can be changed while the motor is
running by turning the Control Dial. The PULSE button may be pushed and
released to stop the motor momentarily.
3. TURN THE UNIT OFF- Push the "OFF" button when processing is complete. This
will shut the unit off.
UNPLUG
BEFORE
CLEANING.
NEVER immerse Motor Base in water. Clean outside with a damp cloth.
MAINTENANCE
The Motor Base and other moving parts are permanently lubricated and never
need oiling. Any service required should be performed by an authorized Oster
service facility.
CLEANING