Assembling Your Blender; Assembly Of Container; Tightening The Container; Mounting The Container - Oster Kitchen Center Recipes & Instructions

ASSEMBLING YOUR BLENDER

CAUTION: Follow these important steps to assemble, tighten, and mount blender
Container quickly and correctly. INJURY MAY RESULT IF MOVING BLADES ARE
ACCIDENTALLY EXPOSED.

ASSEMBLY OF CONTAINER

1. Turn container upside down so
the small opening is at the top.
2. Place sealing ring on container
opening.

TIGHTENING THE CONTAINER

1. To tighten container bottom, put assembled container
securely into motor base ring with handle and lug in
front of the right stop.
2. Using container handle, turn container to the left as
far as possible. This insures that the container bot-
tom is tightened properly. Remove container from
motor base and mount.
Do not attempt to place the container on or remove it
from the motor base while the motor is running.

MOUNTING THE CONTAINER

1. To operate blender, place assembled container in
motor base ring with container lug against flat side of
right motor base stop. If container lug does not rest
against flat side of right stop, remove container as-
sembly and place against flat side of left stop. Seat
container firmly and operate.
2. To remove container, lift straight up. (If it is not easily
removed, rock gently and lift up. Do not twist.) If con-
tainer bottom cannot be loosened by hand, place
assembled container into the motor base ring with
handle in front of left side stop. Using container han-
dle, turn container to the right until container bottom
loosens.
3. Turn agitator blades upside down
and place in mouth of container.
4. Thread container bottom to
tainer. Engage threads properly.
Screw on firmly.