Table of Contents
Advertisement
1
Replacing the staple cartridge (Finisher FS-527)
The following procedure describes how to replace the staple cartridge for finisher FS-527.
This illustration shows an example where the saddle stitcher SD-509 and punch kit PK-517 are installed in
the optional finisher FS-527.
NOTICE
When replacing the staple cartridge, be sure to check that the message is displayed. If the staple cartridge
is removed before the message is displayed, it will result in a failure.
Do not remove the remaining staples, otherwise the machine will not be able to staple after the cartridge is
replaced.
1-58
Replacing consumables
ineo+ 220/280/360 (Version 3)
1.16
- Quick Links:
- Scan Operations
- Network Operations
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ineo+ 220 and is the answer not in the manual?
Questions and answers