Rx Settings - Canon imageRunner 1670F Facsimile Manual

RX Settings

This submenu allows you to specify reception functions.
1.ECM RX
ON
OFF
2.FAX/TEL OPT.SET
1.RING START TIME
2.F/T RING TIME
3.F/T SWITCH ACTION
6
3.DRPD:SELECT FAX
NORMAL RING
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
4.INCOMING RING
OFF
ON
6-10
Additional Functions Fax Settings
Setting Item
RECEIVE
DISCONNECT
RING COUNT
Description
ECM (Error Correction Mode) receiving is turned on or off.
All receptions are conducted with ECM if the other party's fax
supports ECM (default).
ECM is turned off.
When FaxTel has been set, optional settings are available.
Sets the duration that the machine listens for a fax tone before
ringing.
0 to 30 SEC (8 SEC is the default)
Sets the length of time the machine rings to alert you of an
incoming call.
15 to 300 SEC (15 SEC is the default)
Selects the action taken after the F/T RING TIME expires.
The machine switches to the fax receive mode automatically,
and starts to receive the document (default).
The machine disconnects the call.
Selects a ring pattern for when the machine receives faxes.
(See "Distinctive Ring Pattern Detection Feature (DRPD)
Options," on p. 4-8.)
The norrmal ring type of the telephone line.
Two short rings at regular intervals (default).
Short-short-long rings at regular intervals.
Short-long-short rings at regular intervals.
Patterns other than those described above.
When the machine is set to FaxOnly, selects whether the
machine rings when it receives a call.
The machine does not ring when it receives a fax. (In the Energy
Saver mode, the machine may ring one or two times (default).)
The machine rings when it receives a fax if the handset or a
telephone is connected.
Sets the number of incoming rings before the machine answers.
1 to 99 times (2 times is the default).