Correcting A Mistake - Canon imageRunner 1670F Facsimile Manual

2
BC DEF
GHI JKL MNO
PRS TUV WXY
OPER SYMBOLS
Tone
1
3

Correcting a Mistake

1
1-8
Using the Menus and Keys
Press the appropriate key to enter a letter or number.
If text (:A) is the chosen entry mode, press the key continuously until the upper or
lower case letter you want appears.
If you go past the letter you want, press the key continuously until it appears
again.
NOTE
Each key contains the upper and lower case letters for its group of letters.
(For example: contains the letters ABCabc)
Enter the next letter, if necessary.
If the next letter you want to enter is in the same key, press [ e] to move the
cursor to the right one space. Then, press the key continuously until the letter you
want appears.
If the next letter you want to enter is in a different key, just press that key to move
the cursor to the right and display the first letter of that group.
Follow these steps to enter the word 'Canon':
Press [2] until you see an uppercase <C>
➞
right press [2] until you see a lowercase <a>. Press [6] until you see a
➞
press [ e] to move the cursor to the right
lowercase <n>
➞ press [ e] to move the cursor to the right
<o> appears
an <n> appears.
NOTE
• You can also enter symbols. Press [#] until you see the symbol you want.
However, you cannot enter symbols if the number mode is selected.
• To enter a space, make sure that [Function] is lit
Press [4 ] or [ e] to move the cursor left or right to position
it under the incorrect letter ➞ press [Delete]
correct letter.
NOTE
Make sure that [Function] is lit
start again.
➞
press [ e] to move the cursor to the
➞
press [Space]
➞
press [Clear] to delete the entire entry
➞
press [6] until an
➞
press [6] again until
.
➞ enter the
➞