3
Dial the other party's fax number.
TEL=
For dialing methods, see "Dialing Methods," on p. 3-4.
•
If you enter the wrong number, press [Stop/Reset]
•
If you must first dial a number to get an outside line ("9", for example), add a
•
pause after that digit by pressing [Redial/Pause].
4
J=HJ
Press [Start] to begin scanning the documents for sending.
The machine begins calling the other party after all of the documents are
•
scanned into memory.
If you use speed dialing or redialing, and the TIME OUT setting is on, scanning
•
starts automatically. (See "TX Settings," on p. 6-9.)
To cancel sending once dialing has started, press [Stop/Reset]
•
NOTE
• You can scan a document up to 14 inches (356 mm) long.
• You can load up to 30 pages of letter size paper in the ADF.
• After the machine finishes scanning the document into memory, it returns to the
Standby mode. At this point, you can make the next reservation. You can make
up to 20 reservations for delayed sending. (See "Delayed Sending," on p. 3-21).
1234567890
➞
enter the correct number.
➞
[4 ].
Sending Method
3
3-11