Changing Fax Rx Settings - Canon imageCLASS MF4880dw Basic Operation Manual

Changing Fax RX Settings

1
Press [ ] (Menu).
2 ▲
▼
Press [ ] or [ ] to highlight <Fax RX Settings>, and then press [OK].
3
▲
▼
Press [ ] or [ ] to highlight <RX Function Settings> or <RX Print Settings>, and then press [OK].
4 ▲
▼
Press [ ] or [ ] to highlight the desired item, and then press [OK].
•
See "Settings for Receiving Faxes."
RX Function Settings
ECM RX
Incoming Ring
Remote RX
Switch to Auto RX
5
Specify the setting values, and then press [OK].
6
Press [ ] (Menu) to close the screen.
Settings for Receiving Faxes
Settings
<ECM RX>
<Incoming Ring>
<Remote RX>
<Switch to Auto RX>
<2-Sided Printing*>
RX Print Settings
2-Sided Printing
Reduce RX Size
RX Page Footer
Continue Print. When
Options
Bold: Default settings
Off
On
Off
On
Ring Times: 1 to 2 to 99
(times)
Off
On
Remote RX ID: 00 to 25 to 99
Off
On
Ring Time till Auto RX: 1 to 15
to 99 (seconds)
Off
On
...
Details
The Error Correction Mode (ECM) automatically detects
and corrects errors during fax communication. Using the
ECM function can diminish receive errors even over poor
connections.
Specify whether or not the external telephone will ring during
an incoming call if <RX Mode> is set to <Auto> or
<Fax/Tel Auto Switch>.
After the external telephone rings for specifi ed times, the
machine automatically starts receiving the fax, if the call is a fax.
If the call is a voice call, the machine rings only when
<RX Mode> is set to <Fax/Tel Auto Switch>.
Specify whether or not to remotely instruct the machine to
switch to fax mode when an external telephone is connected.
To send the instruction to the machine, you must dial the
remote RX ID from the external telephone. You can also specify
a remote RX ID.
Specify how long an incoming call should ring before the
machine automatically switches to fax mode. This option is
available when the receive mode is set to <Manual>.
Specify whether or not to print documents on both sides of the
paper.
69