Report Settings
This submenu allows you to specify the report settings.
1.TX REPORT
OUTPUT NO
PRINT ERROR ONLY
OUTPUT YES
2.RX REPORT
OUTPUT NO
PRINT ERROR ONLY
6
OUTPUT YES
3.ACTIVITY REPORT
ON
OFF
6-8
Additional Functions Fax Settings
Setting Item
REPORT WITH TX
IMAGE
ON
OFF
Description
Enables/disables automatic printing of a transmission report.
No report is printed.
Prints a report only when a transmission error occurs (default).
If you select <PRINT ERROR ONLY> or <OUTPUT YES>.
This setting enables/disables printing of the first page of the
fax under the report.
Prints the first page (default).
The first page is not printed.
Prints a report every time you send a document.
Enables/disables automatic printing of a reception report.
No report is printed (default).
Prints a report only if a reception error occurs.
Prints a report every time you receive a document.
Enables/disables automatic printing of an ACTIVITY REPORT
after every 20 transactions.
Prints the ACTIVITY REPORT (default).
The ACTIVITY REPORT is not printed.