Basic Call Handling; Placing A Call-Basic Options - Cisco 7961G Phone Manual

Basic Call Handling

You can perform basic call-handling tasks using a range of features and services. Feature availability
can vary; see your system administrator for more information.
Placing a Call—Basic Options
Here are some easy ways to place a call on your Cisco Unified IP Phone.
If you want to...
Place a call using the handset
Place a call using the
speakerphone
Place a call using a headset
Redial a number
Place a call when another call
is active (using the same line)
Dial from a call log
Tips
• You can dial on-hook without a dial tone (predial). To predial, enter a number, then go off-hook
by lifting the handset or pressing Dial,
• When you pre-dial, your phone tries to anticipate the number you are dialing by displaying
matching numbers (if available) from your Placed Calls log. This is called Auto Dial. To call a
number displayed with Auto Dial, press the number, or scroll to it and go off-hook.
• If you make a mistake while dialing, press << to erase digits.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 4.2(3)
Then...
Pick up the handset and enter a
number.
Press and enter a number.
Press and enter a number. Or if
is lit, press New Call and enter a
number.
Press Redial to dial the last number, or
press the Navigation button (with the
phone idle) to see your Placed Calls.
1. Press Hold.
2. Press New Call.
3. Enter a number.
1. Choose > Missed Calls,
Received Calls, or Placed Calls.
2. Select the listing or scroll to it and
go off-hook.
, or
For more information, see...
An Overview of Your
Phone, page 17
Using a Handset, Headset,
and Speakerphone, page 46
Using a Handset, Headset,
and Speakerphone, page 46
Using Call Logs, page 51
Using Mute, page 29
Using Call Logs, page 51
.
25