3Com HomeConnect Getting Started Manual page 39

Setting Up the Computer to Use an Ethernet Connection
instructions. However, if a similar entry is not present,
complete the following steps.
1 Click Add.
2 Select Protocol in the Select Network Component Type
dialog box. The Select Network Protocol dialog box
appears.
3 Select TCP/IP from the Network Protocols list.
4 Click OK.
Configuring the TCP/IP Protocol on a Macintosh
You need to make sure the TCP/IP communications
protocol and an Ethernet device are installed on the
computer before you install the cable modem. Many
Macintosh computers have Ethernet devices installed at the
factory.
1 Click the Apple
Scroll down to Control Panels, and click TCP/IP.
®
icon in the upper left corner of the Finder.
33