3Com HomeConnect Getting Started Manual page 40

34 C 3: E
HAPTER
2 Click Edit on the Finder (gray bar) at the top of the screen.
Scroll down to the bottom of the menu and click User
Mode.
3 Click Advanced then click OK.
4 Click the Up/Down selector arrows (to the right of
Configure) and select Using DHCP Server.
5 Click Options. Then click Active.
In some cases, the Load only when needed check box does
not appear. If it is visible, click the box. A check mark
appears in the box.
I
THERNET NSTALLATION