Using Usb With The Windows Me Operating System - 3Com HomeConnect Getting Started Manual

18 C
HAPTER
6 Select 3Com HomeConnect Cable Modem External with
USB. Make sure you have selected the software you want
to delete. If you accidentally select the wrong software and
click Change/Remove, Windows deletes the software and
you will have to re-install it.
7 Click Change/Remove. The system removes the 3Com
HomeConnect Cable Modem software.
8 The system prompts you to restart the computer. Click Yes.
9 Click Windows Start, then click Shut Down.
10 Select Restart the Computer and click Yes to restart the
computer.

Using USB with the Windows Me Operating System

To use the USB port with Windows Me:
1 Power on the computer.
2 Use the illustration on page 27 as a guide to make the
following connections:
a Connect the cable line to the cable modem's CATV cable
2: USB I
NSTALLATION
connector. Be careful not to bend the wire in the center
of the cable line when you connect it to the cable
modem. After hand-tightening the CATV cable
connector, use the adjustable wrench to firmly tighten it.
Be careful not to over-tighten the connector or you may