Table of Contents
Advertisement
(PAGE 61 - 62)
7-1. TORQUE SPECIFICATION
The following torque specifications muSt be
adhered to on every machine. When applying
torque to multi-secured fastener components,
the several studs should be tightened in
gradual stages and in a pattern that will avoid
warpage to the item being secured. Torque
settings are for dry, clean threads. Torquing
should always be done to the nut, never the
bolt head.
NOTE:
Certain items with other than standard thread
pitches may require differing torque.
-146-
Advertisement
Table of Contents
