Table of Contents
Advertisement
6. REDUCTION AND ENLARGEMENT COPYING (Cont.)
Selecting the Original Size and the Copy Size
1
Press the ZOOM ORG.
2
Press the ORIGINAL SIZE key of the same
size as the original to be copied.
3
Press the desired COPY-SIZE key.
● The copier calculates the correct reproduction
ratio based on the selected original size and
copy size, and displays the reproduction ratio
on the reproduction-ratio display.
(See page 103 for how to use the UNIV key.)
● If the desired size of paper is not in any of
the installed cassettes, the following message
appears:
Set correct cassette
Install the correct-sized cassette or use the
sheet bypass.
4
Place the original(s) on the original feed
tray or on the glass.
● See page 22 for how to set the originals.
5
Select the desired image density level and
copy quantity.
6
Press the START key.
Tip:
If there are sheets of paper set on the
sheet bypass, you must press the COPY-
SIZE key corresponding to the sheets
(see page 41).
34
A4 KEY.
Advertisement
Table of Contents
