When the Automatic Paper Selection is not Available
The copier may not be able to detect the size
of the following types of original in the APS
mode:
● Transparent originals such as OHP film
● Entirely blackish originals or originals with
blackish edges
● Non-standard size originals such as
newspapers and magazines.
Select the copy size referring to the following
steps.
1
Place the original(s) on the original feed
tray or on the glass.
● See page 22 for how to set the originals.
2
Select the desired paper size.
● Press the cassette of the desired copy size
on the Basic menu.
● Or press the ZOOM ORG.➞A4 key on the
Basic menu to display the screen on the right,
then press the key of the desired copy size.
3
Return to the Basic menu, then select the
image density level and copy quantity as
required.
4
Press the START key.
Tip:
If there are sheets of paper set on the
sheet bypass, you must press the COPY-
SIZE key corresponding to the sheets.
See page 41.
31