Table of Contents
Advertisement
12. INTERRUPT COPYING
The interrupt copying mode is convenient when you want to make copies of another set of
originals during a multicopy run. Interrupt copying is possible using the cassettes or the bypass.
1
Press the INTERRUPT
The following message appears:
Job interrupted job 1 saved
2
Replace the original with a new original.
● See page 22 for how to set the original.
Tip:
During the interruption, the reversing
automatic document feeder (optional)
and automatic duplexer (optional) are
inoperable.
3
Select the desired copy size, image density
level, reproduction ratio,etc. if necessary.
4
Press the START key.
● You can make multiple copies by pressing the
START key once for each copy desired.
5
After interrupt copying is finished, press
the INTERRUPT key again.
● The following message appears:
Ready to resume job 1
6
Replace the previous original and press the
START key.
● The remaining number of copies of the
previous multicopy run will be made
automatically.
When the Controller (optional) is installed
Interrupt Copying during Printing
If you press the COPY JOB REQUEST key
while the printer is being used, interrupt
copying becomes available when the
current printing job is completed.
The screen on the right appears during printing.
● If you want to make copies as soon as
printing has been finished,press the
COPY JOB REQUEST key.
● If you want to cancel the copy request, press
the CANCEL REQUEST key
; ; ; ; ; ;
key.
;
;
INFO
49
Advertisement
Table of Contents
