3
After having adjusted the margin, press
the SET key.
● The default margin is 7 mm.
● To adjust the margin:
0mm
Press the
the desired margin setting, and press the SET
key.
● In duplex copying, margins in the back are
created on the other side of those in the front.
See page 73 for duplex copying.
Margin on the Book Originals
2
Select on which side the margin is to be
created.
● Press the BOOK key.
● If you select the BOOK margin, use it in
conjunction with the DUPLEX COPYING mode
from book originals (page 79) or DUAL PAGE
mode (page 68).
3
After having adjusted the margin, press
the SET key.
● The default margin is 14 mm.
● To adjust the margin:
2mm
Press the
the desired margin setting, and press the SET
key.
4
Place the original on the glass.
● The book should be centred on the yellow
indicator line with its bottom toward you.
5
Select the desired copy size, image density
level, reproduction ratio and copy quantity.
6
Press the START key.
Tip: Margins can be created also in the bypass
copy mode. To do this, set the paper in the
sheet bypass (see page 42), and press the
desired COPY-SIZE key to select the desired
paper size.
30mm
or
key to select
30mm
or
key to select
Yellow
indicator line
63