AT&T SB67030 System Administrator Manual page 64

AT&T SB67010 Gateway, SB67030 Deskset System Administrator's Guide
To view or modify the system Basic Settings: (Continued)
Figure 63. Basic Settings - System Time/Date
System Configuration
4. Use the Telephone Line to Telephone Line Call Timer feature to
limit the duration of forwarded incoming calls to non-system phone
numbers, such as to cell phones. When you forward these calls, two
of your phone lines are in use for the duration of the forwarded call,
one for the incoming call and one for the call to the forwarded line.
The default time is 30 minutes and the range is from 15 to 120
minutes.
5. The time can be automatically set from the online NTP Server
(recommended) or you can set it from the WEBUI. The time defaults
to Daylight Savings Time set by the NTP Server, but you can specify
another server. If you have the time set by another server, enter
whether your area observes Daylight Savings Time.
NOTE: Before changing the system time or date, make
sure that there are no calls in progress or some
extensions' time may not be updated.
Locate System Time/Date Options:, as shown in Figure 63.
Click the Set Time by NTP Server button:
Click the Default button to set the time automatically from
a.
the Network Time Protocol (NTP) server.
b. Click the Custom Time Server: button if you have your
own time server and enter the URL into the field.
64