Troubleshooting - Sabre 1338 Gear Technical Manual

TROUBLESHOOTING

TROUBLESHOOTING
Problem or
Symptom
Check or
Solution
Belt sheaves, idlers, &
guides loose, out of
adjustment, worn, or
damaged
Belt worn, frayed, glazed,
or stretched—replace belt
Clutch/brake pedal
linkage out of adjustment
Clutch/brake components
worn, bent, or broken—
replace and adjust
Shift lever and linkage
bent, worn, out of
adjustment, or broken—
replace or adjust properly
Input sheave, input shaft,
and axle keys or keyways
worn or damaged—
replace
Internal transaxle
components worn,
stripped, or broken
Transaxle case halves
worn or broken—replace
Incorrect type or volume
of lubricant used—replace
with correct type and
volume
Intermediate shifter/brake
shaft or axle seals worn or
damaged—replace seals
Transaxle cap screws
loose or case holes
stripped
Poor application of
sealant on transaxle case
halves
Incorrect type sealant—
replace with proper
sealant
2/12/97
www.servicemanualall.com
GEAR POWER TRAIN
5 - 5