Traction Drive Belt Installation - K55; Traction Drive Belt Installation-K51 - Sabre 1338 Gear Technical Manual

HYDROSTATIC POWER TRAIN
TRACTION DRIVE BELT
INSTALLATION – K55
Engine Pulley
Link Arm
1. Thread belt around belt guide on engine drive pulley
assembly. Install on smaller drive pulley, nearest
engine.
2. Place belt over pulley on input shaft of gear box.
3. Place belt over idler pulley.
4. Extend tension pulley and slip belt over pulley.
5. Replace steering link arm in steering yoke. Place
other end in tie rod and secure with washer and
new cotter pin.
6. Reassemble brake lock.
7. Check belt tension. See "DRIVE BELT
ADJUSTMENT" on page 31.
8. Remove blocking and return tractor to level.
9. Hook up battery and spark plug.
6 - 38
www.servicemanualall.com
Tension Idler
Belt
Yoke Arm
Adjust. Idler
Park Brake Lever
Locking Rod
TRACTION DRIVE BELT
INSTALLATION—K51
Tension Idler
Adjust. Idler
1. Thread belt around belt guide on engine drive pulley
assembly.
2. Place belt over pulley on input shaft of gear box.
3. Place belt over adjustable idler pulley.
4. Extend tension pulley and slip belt over pulley.
5. Check belt tension. See "DRIVE BELT
ADJUSTMENT" on page 31.
6. Remove blocking and return tractor to level.
7. Hook up battery and spark plug.
8.
REPAIR
Belt
Input Shaft
2/12/97