Using Troubleshooting Chart - Sabre 1842GV Operator's Manual

Using Troubleshooting Chart

If you are experiencing a problem that is not listed in this
chart, see your Authorized SABRE Service Center for
service.
When you have checked all the possible causes listed
and you are still experiencing the problem, see your
Authorized SABRE Service Center.
Engine
IF
Engine Will Not Crank
Engine Runs Unevenly
Engine Will Not Idle
Engine Is Hard To Start
TROUBLESHOOTING
CHECK
Brake is not pushed down.
Loose or corroded electrical connections.
PTO knob is in ON position.
Fuse is blown.
Spark plug wire is loose or disconnected.
Cooling fins plugged.
Loose electrical connections.
Choke or throttle cable sticking.
Air cleaner dirty.
Water in fuel or carburetor float bowl.
Dirt in carburetor float bowl.
Spark plug not gapped correctly.
Faulty spark plug.
Choke on or partially on (warm engine).
Fuel filter is gummed or plugged.
Spark plug is fouled.
Faulty spark plug or wire.
Spark plug is not gapped correctly.
Loose or corroded electrical connections.
Stale fuel.
Choke is adjusted or used incorrectly.
Troubleshooting - Page 72