HYDROSTATIC POWER TRAIN
2. Remove c-clip (A) and upper fan retainer (B).
3. Remove drive sheave and fan assembly.
4. Remove fan lower retainer (C) and e-ring (D).
Install Drive Sheave and Fan—
1. Install e-ring (A) in groove on input shaft, and fan
lower retainer (B) with flat side towards fan.
6 - 60
www.servicemanualall.com
A
B
2. Install drive sheave and fan, fan retainer (C) with
TRANSAXLE INSTALLATION—K51
C
D
1. Install transaxle. See "TRANSAXLE REMOVAL
2. Test and adjust entire traction drive system. See
B
A
flat side towards fan, and c-clip (D).
AND INSTALLATION—K51" on page 58.
"TESTS AND ADJUSTMENTS" on page 30 for
relevant procedures.
REPAIR
C
D
2/12/97