Authorization Code; Broker's Call; Call Back - NEC Univerge SV8300 User Manual

1.
conversation, such as using a beep tone or other
notification methods or require the consent of
all parties to the telephone conversation, prior
to monitoring or recording a telephone
conversation. Some of these laws incorporate
strict penalties.

Authorization Code

An Authorization Code is a numerical code that will
temporarily change a station's Class of Service to a
Class of Service assigned to that Authorization Code.
This new Class of Service allows access to trunks,
dialing patterns, and/or features that would otherwise
be restricted.
1. Lift handset and receive dial tone.
2. Enter the feature access code for Authorization
Code.
3. Enter the Authorization Code.
4. Receive dial tone.
5. Enter the number to be called or access the
desired feature.
B ' C
ROKER S ALL
This feature allows a user to alternate between two
parties, talking to one party while the other party
remains on Hold on the same line.
To activate a Broker's Call with a call in progress:
1. Press the FLASH key (or momentarily press
hookswitch) and receive feature dial tone.
The first party is placed on Consultation Hold.
2. Dial the Call Hold feature access code and
receive extension dial tone.
3. Dial the new number and the second party
answers.
4. Press the FLASH key (or momentarily press the
hookswitch). The second party is placed on
Consultation Hold.
5. Dial the Call Hold feature access code and the
second party is placed on Call Hold. The first
party is connected again.
6. Repeat the last two steps, as necessary.

Call Back

This feature allows a calling party to set an automatic
Call Back when a busy or no answer condition is
encountered. When the busy station becomes idle, the
station that set the Call Back will be called. In case of
Call Back no answer, the Call Back to the setting station
is initiated immediately after the called station goes
on-hook after making a call or accessing a feature.
1. Dial the desired station number and receive busy
tone or ringback tone.
2. Dial 2 and receive service set tone (if single digit
access feature access codes are enabled) for
busy tone only.
- or -
Press the FLASH key (or momentarily press the
hookswitch) and receive feature dial tone. Dial the
Call Back feature access code if busy tone, dial 2
if ringback tone and receive service set tone.
3. Restore the handset.
4. When the busy station becomes idle, the station
that set the Call Back will ring. The same will
happen if the station that did not answer first
initiates or answers a call or accesses a feature
and then becomes idle.
8