Account Code; Forced Account Code; Authorization Code; Voice First/Tone First - NEC DT310 User Manual

Account Code

To enter
Lift handset or press Speaker, receive dial tone.
Enter feature access code, receive service set
tone.
Enter "Account Code" (up to 16 digits). (Note)
Receive dial tone and dial desired number.
To enter account code after authorization code
Lift handset or press Speaker, receive dial tone.
Enter feature access code for "Authorization Code",
receive service set tone.
Enter "Authorization Code", receive second service
set tone.
Enter "Account Code", receive dial tone, and dial
desired number.
Authorization and Account Codes may be up
Note:
to 20 digits combined (or 34 digits combined).

Forced Account Code

Lift handset or press Speaker, receive dial tone.
Enter feature access code, receive service set
tone.
Enter "Forced Account Code" (up to 10 digits),
receive dial tone.

Authorization Code

To enter without account code
Lift handset or press Speaker, receive dial tone.
Enter feature access code, receive service set
tone.
Enter "Authorization Code" (up to 16 digits).
Receive dial tone, dial desired number.

Voice First/Tone First

Allows incoming station calls to your Dterm to either
ring or go to voice announcement.
Press Speaker key. Receive dial tone.
Dial Voice/Tone access code, LED display shows
current mode receives feature dial tone.
4:26 PM
Press *, LED display shows mode change, receive
feature set tone.
4:26 PM
Note: Each time * is pressed, you alternate between
TONE and VOICE.
31
VOICE
TUE 12 FEB 2008
TONE
TUE 12 FEB 2008