Authorization Code; Voice Call - NEC NEAX 2400 IPX User Manual

Authorization Code

To enter without account code
Lift handset or press Speaker, receive dial tone.
Enter feature access code, receive service set tone.
Enter "Authorization Code" (up to 10 digits).
Receive dial tone, dial desired number.
- Or -
Lift handset, receive dial tone.
Dial desired number.
If an "Authorization Code" is required, caller hears special dial tone.
Enter "Authorization Code", or call will be denied.
Note: This option is available only if system is programmed with Least Cost Routing.
To enter with account code (see above)
Service set tone is optional depending upon system programming.
Note: If a 4-, 8- 16- or 32-button display terminal is used, the display indicates all of the digits dialed.

Voice Call

Lift handset
Dial desired station number.
Press Voice.
Speak to called party.
– 37 –
VOICE
4:26 PM TUE 13 APR 2004
2000