Pulse Feature; Turning Off - SOLE F80 Owner's Manual

PULSE FEATURE

The Pulse (Heart Rate) Window will display your current heart rate in beats per minute during
the workout. You must use both stainless steel sensors on the front cross bar to display your
pulse or wear the wireless chest strap. The pulse value will display anytime the upper display is
receiving a pulse signal.
TURNING OFF TREADMILL
1. The display will automatically turn off - go to sleep - after 30 minutes of inactivity when in the
Pause / Stop mode. Almost all power for the treadmill will be off except for some circuits that
are needed to detect if any key is pressed, indicating the console should "wake up". When the
console is "asleep" the treadmill draws very little power, about as much as your television
when it is turned off.
2. Removing the Safety Key is similar to entering "sleep" mode. Turning off the main power
switch in the front of the treadmill will completely remove any power.
**ATTENTION**
Your new console comes configured in an in-store 'Display Mode' of operation, where the
console will remain powered on unless the main power switch is turned off. To exit the display
mode, for normal operation, press and hold the Stop, Enter and Display keys for 5 seconds;
the display will show: Display mode - On. Use any of the Incline or Speed keys to change the
setting to Off then press Enter.
16