Download Print this page

Kipp & Zonen LOGBOX SD Instruction Manual page 43

Advertisement

FINAL LogInterval = 1 minutes
V
Setup writing interval on SD card
V
You can use the following SD card WRITTING intervals:
1,2,3,4,5,6,10,12,15,20,30 minutes, 1,2,3,4,5,6,12,24 hours & NEVER
Switch between them by <SPACE> and confirm by <ENTER>
SDWriting = 1 minutes
If you type <SPACE> you will roll over mentioned intervals. If you will type <ENTER>
you will receive following response
FINAL SDWritting = 1 minutes
J
Setup file close interval on SD card
J
You can use the following SD card FILE_CLOSING intervals:
10 20 30 minutes, 1, 2, 3, 4, 5, 6, 12, 24 hours and Always
Switch between them by <SPACE> and confirm by <ENTER>
If you type <SPACE> you will roll over mentioned intrevals. If you will type <ENTER>
you will receive following response
FINAL SdFileClose = 24 hours
l
Type all data in memory
l
2004-11-27 10:46:03
2004-11-27 10:47:03
2004-11-27 10:48:03
2004-11-27 10:49:03
Q
Quit service mode
To access configuration commands, you will need to type space in
service mode. Then you have available following configuration
commands:
Analog inputs configuration commands
55.778 61.274 61.268 / / /
55.781 61.284 61.288 / / /
55.773 61.329 61.333 / / /
55.771 61.188 61.178 / / /
0.888
0.785 / / / /
0.745
0.705 / / / /
0.637
0.640 / / / /
0.667
0.633 / / / /
43

Advertisement

loading