Advertisement
There are additional chapters, 15 and 16, which explains how to enter your own
polynomials for the sensors (Sensitivity depended) and for usage of a different
PT100 or Thermistor.
13.4. Baud rate settings.
Next window is for serial line speed setup. Speed can be selected from the range
300bps up to 115200bps. Please, note that 8 bit, no parity, 1 stop bit and no
hardware control is used.
Serial line speed applies only to serial line during measurement. If you will go to
service mode, 115200bps is set automatically.
27
Advertisement
