Advertisement
After starting the software, following window will appear.
1: Toolbar.
2: Sensor configuration. (Analog)
3: Polynomial section.
4: Bit rate settings.
5: Logging options.
6: Sensor configuration. (Digital)
7: Writing options to memory card.
8: Sending or reading the entire configuration to and from the LOGBOX SD
14.1 Toolbar
The top menu offers the following:
In this menu you can create new configurations (New) and save them (Save As...), or
you can open existing configuration (Open...). Last four configurations are directly
accessible. With Exit you will close the application.
22
Advertisement
