Advertisement
Second item is for user predefined sensors. Sensor description is included in
sensor.ini file, with strictly defined syntax. Because not every sensor can be
connected to any input read the manual for more explanation.
Next parameter is type of connection. You can select single ended or differential. In
the case of differential measurement software will automatically disable the following
channel (differential input needs two physical channels, see examples in chapter 9)
Resolution can be set for 12 or 24 bits. 24bits resolution is used for low level
signals. This type of measurements takes longer time (approximately 1 second per
measurement).
Input mode can be selected to unipolar or bipolar. Bipolar mode is mostly selected
for 24 bit differential resolution.
Input voltage range is selected for 24 bit resolution only and can be selected from
one of eight available ranges.
24
Advertisement
