Advertisement
D – date setup with syntax YYYY MM DD (YYYY-year, MM-month, DD-
day)
D
Enter YYYY MM DD
2005 11 27
You've entered: 2005-11-27
<Y> = set, else = quit
Y
SET.
0
Clear all logging memory
0
Are you sure that you want to erase all logs?!
CAP<Y> = erase, else = quit
Y
ERASED.
OK
F
Save configuration to the memory
U
Setup communication speed for serial line
U
You can use the following baud rates:
300 1200 2400 4800 9600 19200 38400 57600 115200
Switch between them by <SPACE> and confirm by
<ENTER>
Baud Rate = 115200
If you type <SPACE> you will roll over mentioned intervals. If you will type <ENTER>
you will receive following response:
FINAL Baud Rate = 115200
I
Setup logging interval
I
You can use the following logging intervals:
1 2 3 4 5 6 10 12 15 20 30 60 minutes, 10 20 30 seconds & FAST
Switch between them by <SPACE> and confirm by <ENTER>
LogInterval = 1 minutes
If you type <SPACE> you will roll over mentioned intervals. If you will
type <ENTER> you will receive following response:
42
Advertisement
