Advertisement
All digital input measurements are active also during sleep period in measuring
mode. Software controls automatically power consumption.
Communication ports can be configured for speeds from 300bps up to 115200bps.
Service mode is always with speed 115200bps, regardless of set communication
speed. It is due to faster data download from the memory in service mode. You need
to have correct setup on your communication software on PC.Service mode is
accessible only on RS232 serial line.
All other functions (real time circuitry, logging to the memory, power management)
is controlled by the software without need of user action.
After switching on the LOGBOX SD is in measuring mode. That means that there is a
logging interval. At the beginning of this interval LOGBOX SD performs all analog
measurements (if there is set delay longer than 0 sec, measurements are activated
only after current delay). Then all calculations and data logging is in progress. After
that sequence, LOGBOX SD goes to sleep mode until next logging interval.
14. PC Configuration software
The PC Configuration software is designed for easy set up of the LOGBOX SD with
the used radiometers or sensors. It is very intuitive in use and a full configuration
can be made in just a few minutes. The LOGBOX SD software is a simple
executable file, without the need for further installation It is compatible with
Win9x, Win2000 and WinXP operating systems.
First of all it is necessary to copy LOGBOX SD.exe and sensor.ini files to your
computer. (they should both be in the same directory). Open the supplied CD in a
window. Select both files (LOGBOX SD.exe and sensor.ini). Select the directory on
your local computer where you want to store LOGBOX SD files and copy them
there. There is no need for further installation. For maximum comfort it is
possible to create shortcut on your desktop. (click the right mouse button on
LOGBOX SD.exe and drag it to the desktop. Then release button and select Create
Shortcuts Here option.
21
Advertisement
