※ Please read this user’s manual cautiously and completely before operating this monitor. Important Safety Instructions Before using the monitor, please read this user’s manual thoroughly to help protect against damage your own and other people’s property and to ensure your own and other people personal safety. Be sure to observe the following instructions with understanding meaning below.
If the power cord or plug is damaged or becomes hot, turn off the main power switch of the monitor, make sure the power plug has cooled down and remove the power plug from the outlet . If the monitor is still used in this condition, it may cause a fire or an electrical shock. Contact Aydin Displays for a return authorization.
Use Caution When having installation problems, contact Aydin Displays at 610-404-7400. Protect and correctly use the power cord/ plug. Don't heavy press the power cord/ plug, don't step on the power cord/plug. Connect the power cord and the monitor before insert the power plug into the wall outlet. Don't operate the monitor with a damaged power cord, otherwise the monitor will be damaged.
Other functions PIP/ PAP function. Please see the chapter “Display mode”. Quick Adjustment- Volume & input source selection .Please see the chapter ”The side controller of the monitor “&”OSD menu function”. Support 4 picture scene mode-standard, movie, vivid, user. Please see the chapter ”OSD Menu Function “.
Page 7
Step 2: Remove the top cushion and take the accessories box out. Top cushion The Monitor Accessories Box Bottom cushion Packing list Q’ty Item Q’ty Item 1 set CFP32W1 1 pcs DVI-D 24 pin cable 1 pcs Power cord 1 pcs D-SUB 15pin cable 1 pcs User's manual...
Installation Environmental state Operating temperature︰ 5℃ ~ 40℃ (Fahrenheit : 41℉ ~ 104℉) Humidity︰ max. 85% Power Input Power Cord AC Power cord This power cord is used to connect the side controls of the LCD monitor and the wall outlet. ○”...
The RGB inputting You can select RGB input and Video for 3 connections as below: RGB signals Connection type Signal RGB Analog VGA 15 pins RGB Analog RGB Digital DVI-D DVI-D 24 pins RGB Digital Signal delivery Connection type Signal RS-232C(Option) 9 pin RS485-IN input (option)
Change The RCU Battery (RCU option) Push down as picture (1) and pull the back cover. Replace with the new batteries as picture (2), 1 piece Lithium battery(CR2032) make sure the polarities of batteries are correct. iii. Place the back cover and slide it as in the picture (3). Used batteries needed to follow the city rule to be discarded.
Page 13
Display ID number Current source H: 48.2KHz V: 59.8 Hz Sub source Main source <Picture 1> 150-CFP-320 Page 13...
OSD (On Screen Display) Menu Function Main Menu Sub-Menu Description Setting Contrast Adjust the contrast of the screen 0~100 Brightness Adjust the brightness of the screen 0~100 Adjust the picture hue of the screen 0~100 Picture Saturation Adjust the picture saturation of the screen 0,100 (Video mode) Color-Tone...
OSD Operating Structure of OSD Menus Press “ ”or ” ” to adjust Press”▼” to select the value OSD menu item Press” ” to enter OSD Press “ ”or ” ” to select submenu. the setting Press “MENU/EXIT” to enter or exit OSD menu λ...
Page 16
λ Function : OSD color is Green On side of controller: Press “MENU/EXIT” to enter the OSD menu Press”▼” twice and then press “ ”to select Function setting. Press”▼” to select the Set Display ID, Multi Picture setting Press“ ” or “ ”to adjust ID number or select Multi Picture the setting.
Troubleshooting Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Perform the adjustments according to Operation The Monitor Refer to the following items if you can’t find a proper item listed in the Operating the Monitor or if the problem remain.
Page 21
Appendix I Moving Notice: Moving the monitor requires at least two people. If not, it may drop and a serious injury may result. Moving/shipping the monitor, please hold the white handles and be sure to make the bundle. If not, it may drop and a serious injury may result.
Appendix II Industrial VESA Wall Mount kit Please follow all manual instructions and refer all servicing to qualified service personnel. Moving the monitor requires at least two people. If not, it may drop and a serious injury may result. Before installing, please check the installing manual in wall mount kit box. Before installing, please make sure the wall is strong enough.
Need help?
Do you have a question about the CFP32W1 Large Screen Series and is the answer not in the manual?
Questions and answers