Page 2
Aydin Displays reserves the right to modify or revise the content of this manual. It is further understood that in consideration of the receipt or purchase of this manual, the recipient or...
FEDERAL COMMUNICATIONS COMMISSION REQUIREMENTS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Use the specified cables with the VFP19 display so as not to interfere with radio and television ♦...
Page 4
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRODUCT SAFETY PRECAUTIONS The socket-outlet of power supply shall be installed near the equipment and shall be easily accessible. ♦ Follow all warnings and instructions marked on the display. ♦ Do not attempt to service this display yourself. There are no user replaceable parts inside and removing ♦...
Page 6
Thank you for purchasing the Aydin Displays VECTOR Display. This carton contains the items listed below: VFP19 LCD Display ♦ 10 foot Power cord ♦ 10 foot HD15(M) to HD15(M) Video Cable ♦ 10 foot DVI-D(M) to DVI-D(M) Video Cable ♦...
Page 7
DISPLAY CONNECTIONS AND ADJUSTMENTS: If you have any problems connecting, setting up, or operating the display, please refer to the Troubleshooting section of this guide. DVI-D VIDEO Connector: This input is used for Digital Video input, connect one end of the supplied DVI-D video cable to the DVI-D connector on the rear of the display and the other end to a DVI-D connector on the video source.
BRIGHTNESS/CONTRAST CONTROLS: BRIGHTNESS: Adjusts the overall image and background screen brightness. CONTRAST: Adjusts the image brightness in relation to the background. SHARPNESS: This function uses digital technology to keep a crisp image at any timing. Sharpness is independent from other settings and can be adjusted continuously to get a distinct or soft image.
BLUE: Adjusts BLUE color video level highlights. AUTO COLOR: Adjusts the gain of the amplitude on the video input signal. AUDIO CONTROLS: VOLUME: Adjusts the level of the audio output. MUTE: Enables and disables the audio output. OSD SETTING: H POSITION: Adjusts the horizontal position of the OSD by increasing or decreasing this setting.
VECTOR 19 SPECIFICATIONS: Visual Performance: Diagonal: 19 inch TFT Active-Matrix LCD Active Display Area: Horiz.: 396.32mm Vert.: 301.056 Pixel Pitch: 0.294 mm Luminance: 300cd/m (typical) Contrast Ratio: 1300:1 (typical) Resolutions Supported: Landscape: 720x400 @ 75 Hz 640 x 480 @ 60-75 Hz 800 x 600 @ 60-75 Hz 1024 x 768...
Page 11
Environmental: Operating Temperature: 0°C to 40°C Storage Temperature: -20°C to 60°C Operating Humidity (Non-condensing): 30% to 80% Storage Humidity: (Non-condensing): 10% to 90% Operating Altitude: 0 to 12,000 ft Storage Altitude: 0 to 40,000 ft Shock: 20G, ½ Sine, 11ms pulse Vibration: 0.
TROUBLESHOOTING: NO PICTURE: If the RED LED is lit, verify the FPD is powered on. • If the RED LED is lit, verify that the signal cable is properly connected to the display and computer. • The Green ON LED should be lit. •...
Page 13
VFP19 RACK MOUNT FRONT AND REAR VIEWS Document No. 150-VFP9-104 Rev. (A)
Need help?
Do you have a question about the VFP19R2-000-602 and is the answer not in the manual?
Questions and answers