JBL SYNTHESIS SDP-40HD User Manual page 95

SDP-40HD
VOLUME CONTROL SETUP
REC PWR ON
SETUP VOLUME CONTROLS REC PWR ON
Sets the Record Zone volume level for the output connector labeled
Var to the selected value when the Record Zone is activated. When
LAST LVL is selected, the SDP-40HD sets the Record Zone volume
level to the last volume level that was selected in the Record Zone
during the previous operating session.
When the Record Zone Var audio output connector is connected to
a recording device, set the volume to +0dB to achieve appropriate
recording levels. Adjusting the Record Zone volume level will affect
the recording.
MAX VOLUME
SETUP VOLUME CONTROLS MAX VOLUME
Limits the volume to the MAX VOLUME parameter value if you
attempt to adjust the volume above that level.
(continued)
LAST LVL, -80 to +6dB
-80 to +6dB
Setup
3-55