JBL SYNTHESIS SDP-40HD User Manual page 71

SDP-40HD
SETTING CROSSOVER POINTS
SPEAKER SETUP PARAMETERS
CUSTOM SETUP
SETUP SPEAKERS
The table below indicates the speaker setup parameters for
configuring all possible settings for speaker setup parameters in the
CUSTOM SETUP and SYNTHESIS 7CH SETUP menus.
Speaker setup parameters perform the same function regardless of
the selected speaker setup. When a parameter setting is adjusted on
Parameter Default Setting
FRONT L/R* 80Hz
CENTER* 80Hz
SIDE L/R* 80Hz
REAR L/R 80Hz
SUB L/R* MONO
SUB XOVER* 80Hz
LFE* OFF
THX ULTRA2 SUB OFF
BGC N/A†
ASA APART
* These parameters cannot be adjusted on the SYNTHESIS 7CH SETUP menu.
† When the THX ULTRA2 SUB parameter is set to OFF, the BGC parameter is not available (N/A).
(continued)
or
SPEAKERS SYNTHESIS 7CH SETUP
SETUP
CUSTOM SETUP Menu
Possible Setting
FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz
FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE
FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE
FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE
MONO, STEREO, NONE
FULL, 30Hz to 120Hz, THX 80Hz
ON, OFF
ON, OFF
ON, OFF
APART, CLOSE, TOGETHER
one menu, the corresponding parameter setting is automatically
adjusted on the other menu. For example, when a SYNTHESIS 7CH
speaker setup is selected, the speaker setup parameters on the
CUSTOM SETUP menu are set to THX 80Hz.
SYNTHESIS 7CH SETUP Menu
Default Setting
80Hz
80Hz
80Hz
80Hz
MONO
80Hz
ON
OFF
N/A†
APART
Setup
Possible Settings
80Hz
80Hz
80Hz
80Hz, NONE
MONO
80Hz
ON
ON, OFF
ON, OFF
APART, CLOSE, TOGETHER
3-31