JBL SYNTHESIS SDP-40HD User Manual page 66

Setup
RATE parameter settings have no effect when the DIGITAL BYPASS
parameter is set to ON.
If the downmixed audio is coming from the HDMI input, and the
content is HDCP-encoded, the sample rate is limited to no more
than 48kHz.
If the audio from a copy-protected DVD-Audio disc is input through
HDMI, then no digital audio output is available.
DIG OUT RATE
INPUT, 44.1kHz, 48kHz, 88.2kHz, 96kHz
SETUP INPUTS DVD1
Controls the sample rate of digital and analog input signals sent to
the Record Zone digital audio output connectors. When INPUT is
selected, the sample rate of input signals is not converted.
Therefore, the original sample rate is maintained from the input
connectors through to the Record Zone digital audio output
connectors.
When a value is selected, the input signals pass through the
selected value of sample rate conversion, then pass to the Record
Zone digital audio output connectors. Set the DIG OUT RATE
parameter to the appropriate value when using a recording format
that operates on a single sample rate, such as CD-R format
(44.1kHz).
If the downmixed audio is coming from the HDMI input, and the
content is HDCP-encoded, the sample rate is limited to no more
than 48kHz.
3-26
RECORD ADVANCED DIG OUT RATE
RECORD
SETUP INPUTS DVD1 RECORD ADVANCED
Prevents recording device feedback loops. When BLOCKED is
selected, the SDP-40HD blocks the Record Zone audio output
connectors to prevent feedback loops. However, video input signals
are still passed to the Record Zone video output connectors. When
ENABLED is selected, audio and video input signals are passed to
the Record Zone audio and video output connectors.
JBL
BLOCKED, ENABLED
RECORD