JBL SYNTHESIS SDP-40HD User Manual page 105

SDP-40HD
TILT EQ
AUDIO CONTROLS TILT EQ
Controls the amount of tilt equalization applied to the Main Zone
audio output connectors labeled Front L/R, Center, LFE, and
Subwoofer L/R. This parameter setting affects the entire frequency
spectrum with a hinge point at 1kHz. As the setting increases,
frequencies higher than 1kHz are boosted while frequencies lower
than 1kHz are simultaneously cut. As the setting decreases,
frequencies higher than 1kHz are cut while frequencies lower than
1kHz are simultaneously boosted. The graph shown at the right
indicates the frequency response of all TILT EQ parameter settings.
To control the tilt EQ from the remote control:
Press the Shift button:
• Press the GAME button to increase the TILT EQ parameter
setting in 0.2dB increments.
• Press the AUX button to decrease the TILT EQ parameter setting
in 0.2dB increments.
• Press the OSD button to set the BASS, TREBLE, and TILT EQ
parameters to +0.0dB.
-3.0 to +3.0dB
TILT EQ
The TILT EQ parameter controls the amount of tilt equalization applied to the Main
Zone audio output connectors labeled Front L/R, Center, LFE, and Subwoofer L/R.
Audio Controls
4-5