JBL SYNTHESIS SDP-40HD User Manual page 163

SDP-40HD
Zone 2 & Record Zone Audio Performance
Output Level • 200mVrms typical, 4Vrms maximum (RCA connectors)
• 400mVrms typical, 8Vrms maximum (XLR connectors,
Zone 2 only)
• Maximum value with full-scale input signal and volume at
0dB
Ω
Output Impedance
• 100 in parallel with 150pF (RCA connectors)
Ω
• 50 in parallel with 150pF (XLR connectors, Zone 2 only)
Video Input & Output Connectors
Video Inputs • 2 composite (RCA), 3 S-video, and 4 component video (3
RCA and 1 BNC))
Video Outputs • 4 composite (RCA, 2 main and 2 Record Zone), 2 S-video
(2 monitor and 2 Record Zone), and 1 component (BNC)
Composite & S-video Performance
Compatibility • NTSC, PAL, and SECAM
Switching • Active
Output Level • 1.0V peak-to-peak
Impedance
• 75Ω
Input Return Loss • >40dB
Differential Gain • <0.3%
Differential Phase • <0.3°
Bandwidth • >25MHz
K Factor • <0.3%
Gain • ±0.15dB
Signal-to-Noise Ratio • >70dB
Frequency Response • 10Hz to 8MHz + 0.2dB/-0.3dB
Component Video Performance
Compatibility • 3-channel (Y, Pr, Pb), format-independent
Component Video Performance
Switching • Passive
Impedance • 75Ω
Insertion Loss • <3dB
Bandwidth • >250MHz
Microphone Input Connectors
Inputs • 4 3.5 miniature phone jacks
Input Sensitivity • 10mVrms (400mV maximum input level)
Input Impedance • 20kΩ (accepts balanced or unbalanced input signals)
Other
Trigger Outputs • 1 power on/off and 2 programmable connectors on
detachable screw terminals (+12 VDC, 0.5 amps each)
RS-232 Serial Input/ • 2 9-pin D-sub connectors
Output
Power Requirements • 90-250 VAC, 50-60Hz, 120W (universal line input),
detachable power cord
SDP-40HD • Height (with feet): 6.63 inches (169mm)
Dimensions & • Width: 17.3 inches (440mm)
Weight • Depth: 14.85 inches (377mm)
• Weight: 45lbs (20.5kg)
Rack Mounting • Optional brackets are available for installation in a
standard 19" equipment rack (4 rack units required)
Environment • Operating Temperature: 0° to 35°C (32° to 95°F)
• Storage Temperature: -30° to 75°C (-22° to 167°F)
• Relative Humidity: 95% maximum without condensation
Remote Control • Hand-held, backlit infrared remote control unit
• Requires 2 AA batteries (Alkaline batteries recommended)
Specifications are subject to change without notice.
Appendix
A-3