JBL SYNTHESIS SDP-40HD User Manual page 141

SDP-40HD
2CH BYPASS
MODE ADJUST 2CH BYPASS
This listening mode sends 2-channel analog audio input signals to
the Main Zone audio output connectors labeled Front L/R with no
internal processing.
The 2CH BYPASS listening mode is automatically activated
whenever a 2-channel analog source is present and the MAIN ADV
menu ANALOG BYPASS parameter is set to ON. The 2CH BYPASS
listening mode is not available when a digital source is present and
the MAIN ADV menu INPUT SELECT parameter is set to AUTO.
Pressing the remote control SHIFT then 2CH buttons toggles the
MAIN ADV menu ANALOG BYPASS parameter between ON and
OFF.
Note:
Speaker crossover settings, speaker distances, and audio controls (tone)
are not available when the 2CH BYPASS listening mode is activated.
OUTPUT LEVELS
Listening Mode
MODE ADJUST
Opens the OUTPUT LEVELS menu, which is
OUTPUT LEVELS
used to adjust output levels for the Main
CENTER +0dB
Zone audio output connectors labeled
SIDE L/R +0dB
REAR L/R +0dB
Center, Subwoofer L/R, LFE, Side L/R, and
SUB L/R +0dB
Rear L/R.
LFE +0dB
The OUTPUT LEVELS option does not appear on listening mode
menus when the selected listening mode does not accommodate
multichannel output signals. Instead, an output-specific parameter
appears. For example, the MONO listening mode OUTPUT LEVELS
menu includes a SUB L/R LVL parameter.
Parameter Default Setting
CENTER +0dB
SIDE L/R +0dB
REAR L/R +0dB
SUB L/R (LVL) +0dB
LFE +0dB
See page 5-35 for detailed parameter descriptions.
Mode Adjust
OUTPUT LEVELS
Possible Settings
OFF, -30 to +12dB
OFF, -30 to +12dB
OFF, -30 to +12dB
OFF, -30 to +12dB
OFF, -30 to +12dB
5-33