JBL SYNTHESIS SDP-40HD User Manual page 81

SDP-40HD
CALIBRATION
(continued)
PERFORMING SPEAKER DISTANCE CALIBRATION
SETUP SPEAKERS MANUAL
Selecting the MANUAL SPEAKER SETUP menu SPEAKER DISTANCES option displays the SPEAKER DISTANCES menu, to manually calibrate
speaker distances.
SETUP
MAIN MENU
INPUTS
MODE ADJUST
SPEAKERS
AUDIO CONTROLS
REAR PANEL CONFIG
SETUP
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
To manually calibrate speaker distances:
1. Follow the menu path shown above to select SPEAKER
DISTANCES. The SPEAKER DISTANCES menu shown above will
open on the on-screen display.
2. Press the or arrow button to highlight the desired
speaker distance parameter. Then, press the
to select the highlighted speaker distance parameter.
SPEAKER DISTANCES
CUSTOM SETUP SPEAKER SETUP
SPEAKER SETUP
CUSTOM SETUP
SET CROSSOVERS
SYNTHESIS 7 CH SETUP
CHECK MICROPHONES
SPEAKER DISTANCES
AUTOMATIC SPEAKER DISTANCES
LEVELS CALIBRATION
MANUAL
R
SET CROSSOVERS
80Hz
80Hz
BEFORE CALIBRATING
C
80Hz
M
L
SUB
80Hz 80Hz 80Hz
arrow button
SPEAKER DISTANCES
CUSTOM SETUP
MANUAL SPEAKER SETUP
40 Hz
FRONT LEFT 0.0ft
60 Hz
CENTER 0.0ft
LEVELS CALIBRATION
60 Hz
FRONT RIGHT 0.0ft
60 Hz
SIDE RIGHT 0.0ft
40 Hz
REAR RIGHT 0.0ft
SR RR
OFF
REAR LEFT 0.0ft
80Hz
N/A
SIDE LEFT 0.0ft
APART
MONO SUB 0.0ft
SUB RIGHT N/A
LFE N/A
SL RL
UNITS FEET
80Hz
0.0ft 0.0ft
SPEAKER DISTANCES
3. To determine the appropriate speaker distance, measure the
distance between the primary listening position and the front
of the speaker.
For example, when the FRONT LEFT parameter is selected,
measure the distance between the primary listening position
and the front of the front left speaker (connected to the Main
Zone audio output connector labeled Front L).
4. When the speaker distance has been measured, press the
or arrow button to set the parameter to the closest available
value.
0.0 to 30.0ft or 12.0m
METERS
FEET
Setup
3-41