10.4
XTU setup
42
Siemens Building Technologies
Fire Safety & Security Products
Using the main XTU menu you can configure the XTU to the correct settings for
your control equipment:
1.
Select the correct telemetry protocol. See Section 12: Telemetry controller
operation and setup.
MAIN XTU MENU >> PROTOCOL
2.
Select the control interface type.
MAIN XTU MENU >> INTERFACE
3.
Select the receiver address (camera number).
MAIN XTU MENU >> RECEIVER ADR
4.
Press the
button to view if the video signal is present.
5.
Press the
button to exit 'live video' mode.
08.2006