Table of Contents
Advertisement
8.2
Installation procedure
16
Siemens Building Technologies
Fire Safety & Security Products
The two-piece mounting bracket and the hinge mechanism built into the Dome
casing make the physical installation very simple.
Making the electrical connections is just as simple. All of these are provided via a
single connector fitted to the Cat-5 cable supplied.
This just needs to be plugged in and clipped in place before the Dome casing is
closed and fixed with a single screw. This combination ensures quick installation of
the Dome.
Installation using the recessed ceiling tile mount utilises a simplified fixing
procedure compared to other Domes and the electrical connections are just as
simple as with the bracket and pendant mounted units.
Fig. 2
Cross-sectional view of the Solaris™ Dome
To install the dome unit, proceed as follows:
1.
First install the appropriate mounting bracket. See Section 8.3: Installing the
mounting brackets.
2.
Prepare the Dome bracket. See Section 8.4: Preparing the Dome bracket.
3.
Route the cable through the Dome bracket. See Section 8.5: Cat5 cable
assembly and disassembly.
4.
Connect the cable to the Dome unit. See Section 18.6: Connecting the
Solaris™ Dome.
5.
Attach the Dome to the Dome bracket.
08.2006
Hide quick links:
Advertisement
Table of Contents
