Control Via Simatrix Neo And Dome Converter Cac0103 - Siemens Solaris CCDS1415-ST Configuration Manual

Record / Recall Pattern 2
Record / Recall Pattern 3
Record / Recall Pattern 4
Stop Pattern Record

12.3.2 Control via SIMATRIX NEO and dome converter CAC0103

Operation
Pan Left (var. speed)
Pan Right (var. speed)
Tilt Up (var. speed)
Tilt Down (var. speed)
Focus Near
Focus Far
Zoom In
Zoom Out
Store Preset 1-64
Recall Preset 1-64
Enter OSD menu
Exit OSD
Go to Home Position
Flip
Start Auto Patrol
BLC On
BLC Off
One Push White Balance
One Push AutoFocus
Display Version
Setup privacy zone
IR CutFilter On ("Night Mode")
IR Cut Filter Off ("Day Mode")
Stop Scan
Random Scan
Frame Scan
Auto Scan
Record / Recall Pattern 1
Record / Recall Pattern 2
Record / Recall Pattern 3
Record / Recall Pattern 4
Stop Pattern Record
Siemens Building Technologies
Fire Safety & Security Products
88 Mem / Pos Starts recording or playing Pattern 2.
89 Mem / Pos Starts recording or playing Pattern 3.
90 Mem / Pos Starts recording or playing Pattern 4.
91 Pos Stops recording current pattern.
The Siemens Solaris™ Dome can be controlled via the SIMATRIX video matrices.
SIMATRIX NEO provides direct physical connection via telemetry port 1. For
connection with SIMATRIX SYS / 648 / 164 an additional dome converter
CAC0103, Release V1.7 (Aug. 06) is required to interface the RS485 port of the
dome to the TTY port of the video matrix and to perform the necessary code
translation.
NOTE
We recommend following interfacing:
RS485 connection, 9600 baud, even parity, 8 data bits, 1 stop bit,
camera addressing is 0-254.
Tested using Siemens keyboard CKA4820 and SIMATRIX NEO , CAC0103
User keyboard action
Pan Left
Pan Right
Tilt Up
Tilt Down
Focus Near
Focus Far
Zoom In
Zoom Out
[1...64] Mem
[1...64] Pos
65 Pos
66 Pos
67 Pos
68 Pos
69 Pos
70 Pos
71 Pos
72 Pos
73 Pos
74 Pos
76 Mem
77 Pos
78 Pos
83 Pos
84 Pos
85 Pos
86 Pos
87 Mem / Pos
88 Mem / Pos
89 Mem / Pos
90 Mem / Pos
91 Pos
Notes
Home position is Preset 1 on Solaris™.
Start Preset Tour.
Displays Dome and XTU firmware versions.
Stops current sequence / tour / pattern.
Starts random preset tour.
Starts preset sequence (fixed speed, uniform dwell time).
Starts preset tour.
Starts recording or playing Pattern 1.
Starts recording or playing Pattern 2.
Starts recording or playing Pattern 3.
Starts recording or playing Pattern 4.
Stops recording current pattern.
59
08.2006